Get a Quote
icon-address anqiu , china

welcome to visit us

Ultrafine pulverizer correct method

Ultrafine pulverizer correct method

  The ultrafine pulverizer is an effective pulverized material for any fiber, high toughness, high hardness (hardness) or a certain water rate, is particularly suitable for the broken wall of Chinese medicine cells. Improve the crushing requirements of drug bioavailability and materials that are required to meet the required fineness in conventional methods.

  Today, I will talk about the correct use of the ultrafine pulverizer:

  1. Ultra-fine comminution (grain the powder material to the particle size of the particle size), first carefully inspect the equipment in transportation, then High machines and auxiliary electronic control devices, then connect to the main acetic line, each nozzle flange assembly has a seal, to apply an "iron anchor 609" liquid sealant to ensure the sealing of the pipeline, At the same time, single tube and flange are connected to ground lines (otherwise said: lightning line), and ground to avoid static electricity caused by dust (morphology: solid particles) explosion (a charged charge) spark.

  2. You need to check if there is a metal object in the machine before each individual trial run, if any exclude. The airflow pulverizer changes the normal air of the gas source to nitrogen, carbon dioxide gas, which can make the unit become an inert gas protection device, which is suitable for pulverizing grade processing of materials such as flammable and explosive, easy oxidation. Bolts (composition: head and screw composition) are fastening, belt sealing, reliability of protective cover, and the like.

  3. Start the stable various motors in the following order, turn off the throttle start, grinding machine -> dust collector -> rating device -> Spiral feeder -> Open the throttle -> ventilator.

  4. After five minutes of empty car, the operator carefully observes the various instruments on the control (Electron Flow), and can be fed after the electric vehicle flow (explained: stable stability; there is no change). After the feed, the current is not allowed to exceed the rated value 32.6a, otherwise it should be reduced to ensure that the discharge can be arranged normally.

  5, can be stopped in the following order, screw feeder -> 5 minutes, can be closed with the host, dust collector (role: purifying air), sorting machine -> blower (Draught Fan).

  6. Manipulate the stepless shift handle (bǐng), you can change the speed of the grading wheel, and adjust the product to a fine. If the fine particle size is required, the speed can be improved, and vice versa, decrease (REDUCE) speed, particle diameter. Correct use of the ultra-fine pulverizer can increase the use cycle of the equipment (Lifetime).