Get a Quote
icon-address anqiu , china

welcome to visit us

Technical characteristics of ultrafine pulverizer

  Ultrafine pulverizer technology features: Super-pulverizing machine & crushing room combined with a combination of combination of traditional Chinese medicine, there is three different fragmentation belts in different crushing forms, which can accommodate a variety of material powder. The ultrafine pulverizer utilizes air separation, heavy polishing, and shear, the ultrafine manner is used to achieve a dry material ultrafine pulverized apparatus. It consists of a cylindrical crushed chamber, a polishing wheel, a polishing rail, a fan, a material collection system, and the like. The material enters the cylindrical pulverizing chamber by the feed opening, and is crushed by the polishing wheel that is circumferential movement along the grinding rail, and dissensibly. The pulverized material brings out the pulverizer through the negative pressure air flow caused by the fan, into the material collection system, filtered through the filter bag, the air is discharged, the material, the dust is collected, and the pulverization is completed. The broken belt structure is special, and the fragmentation is fine (fine grain -120 ~ 300 mesh). Since the kinetic energy of the first broken belt is smaller than the kinetic energy of the second broken belt, the gap between the tooth and the abrasive is also smaller, the crushing tool is turned (rigid) by moving (flexibility) . Therefore, the mill is a pre-crushed-strong-striped-fine mill process. At the same time, each crushing partition with the crushing is a certain angle of inclusion, which has a certain clogging effect on the crushing material, which is conducive to the crushing effect. The ultrafine pulverizer crushing chamber is relatively separated from the classified chamber. The crushing production is high. Due to the relative separation of the crushing chamber and the classification chamber, the material in the crushing chamber will not be stranded for too long, thereby avoiding "overcrowding" The occurrence of the phenomenon. (2) Ultrafine pulverized - crusher - crushed chamber is relatively separated from the classified chamber, and the crushing production is high. To improve crushing capabilities. Ultrafine pulverizer - uniquely designed grading chamber and grading wheel, uniform powder unique design grading chamber and variable frequency speed vertical classifier, does not need to configure the screen, grade the particle size of the product at low speed; circulating feed structure Not only do "large particles" not only strictly restrict, but avoid excessive crushing, the particle size distribution is narrow, and the particle size is uniform. Screening is performed using a fractional wheel to 150 mesh, and the phenomenon of screening is avoided. Ultrafine grinding machine - Due to the low pulverization temperature, the "excess crushing" is avoided. The pulverizing chamber does not produce excess heat. At the same time, a flap is provided in the feed end of the pulverizer (if necessary, can be connected to the air conditioner). Due to the presence of the air-winding, the temperature during the crushing process is taken by the air - winding, and the circulating water jacket device is added to the crushing room, further reduces the temperature of the crushing. Fully closed negative pressure operation, powder is not leaked during the crushing process, no environmental pollution, noiseLow; rounded corners design, using fast installation, convenient disassembly, convenient cleaning. It is especially suitable for the TC series ultrafine pulverizer produced by the company, the TP series coarse crusher is reasonably configured to form a Chinese medicine crushing workshop that meets GMP requirements.

Technical characteristics of ultrafine pulverizer