Get a Quote
icon-address anqiu , china

welcome to visit us

How to clean and operate air traffic

The first time, the airflow pulverizer cannot be understood, so is the equipment of the gas current pulverizer and the ordinary crusher? Next, I would like to introduce it to its operation and cleaning method. Ultrafine pulverizer is low, and all of the lifescas is used in high quality wear-resistant materials at home and abroad. It has long service life. A small amount of easy wear parts are made of special hard resistance, small size, light weight, easy to replace the accessories. After the airflow pulverizer is filtered, the pulverizing cavity is sprayed through the Raval nozzle, and the material is repeatedly collided, friction, shear and pulverized, and pulverized material in the intersection of the multi-shaped high-pressure airflow. Next, the rising airflow is moved to the hierarchical region, and the crude material is separated under the powerful centrifugal force generated by the high-speed rotation, the fine particles that meet the particle size requirements are collected by the grading wheel into the cyclone and the dust collector, and the crude particles drops to the pulverization. The district continues to smash. The ultrafine pulverizer is composed of silo, mechanical pulverizer, air blower, cyclone, vibrating screen, liquid nitrogen tank, etc., the deep-cooling pulverizer system is refined by liquid nitrogen as a cold source, and it is crushing at low temperatures by cooling. After the crushing state, enter the mechanical pulverizing cavity through the impeller high speed rotation, the material and the blade, the tooth disc, the material and the material are enrolled under the integrated effect of collision, shear, friction, etc., to achieve a crushing effect.

Airflow mill operation:

1. Before using a pulverizer, first check if all fasteners of the machine have been tightened and the belt is tight.

(2) The spindle must be the same as the direction of the arrow on the shroud, otherwise it will damage the machine and cause personal injury.

3. Check if the crusher is complete.

4. Check if there is a metal and other hard objects in the crushing room of the airflow mill, otherwise it will damage the tool and affect the machine.

5. The purity of the material must be checked before polishing. Metal hard materials are not allowed to avoid damage to the tool or cause combustion.

6. The oil cup on the machine should always note the full lubricant to ensure that the machine is operating normally.

7. Stop the feed before stopping. If you don't continue to use, clear the residue on the machine.

8. Regular inspection tools and screens are damaged. If it is damaged, please replace it now.

9. There is a slight vibration when using your body. Be sure to tighten the lid connection handle to avoid accidents.

Airflow Crusher Cleaning:

1. Clean the other components of the pulverizer: mainly use external screws to cleanGrinding machine cover and parts. These places can be brushed with a brush, and it is necessary to brush with water or detergent when necessary.

2. Cleaning the pulverizer. The crushing machine is the crushing box we said. The item is carried in the crush box, so a part of the cutting head is cleaned. Different airflow pulverizer have different functions. We must first understand this before we quickly get started and use the airflow crusher.

The above is how to clean and operate the airflow pulverizer. The company produces a variety of gas flow grinding, gas flow grinders, complete detection methods, test equipment and laboratory equipment. Widely used in chemical, pharmaceutical, minerals, electronics, pesticides, ceramics and other industries. If you need to buy a product, please call us.

How to clean and operate air traffic