Today, we will discuss the swirl fluidized bed crusher of the jet crusher. After the airflow pulverizer is filtered, the pulverizing cavity is sprayed through the Raval nozzle, and the material is repeatedly collided, friction, shear and pulverized, and pulverized material in the intersection of the multi-shaped high-pressure airflow. Next, the rising airflow is moved to the hierarchical region, and the crude material is separated under the powerful centrifugal force generated by the high-speed rotation, the fine particles that meet the particle size requirements are collected by the grading wheel into the cyclone and the dust collector, and the crude particles drops to the pulverization. The district continues to smash. The ultrafine pulverizer is composed of silo, mechanical pulverizer, air blower, cyclone, vibrating screen, liquid nitrogen tank, etc., the deep-cooling pulverizer system is refined by liquid nitrogen as a cold source, and it is crushing at low temperatures by cooling. After the crushing state, enter the mechanical pulverizing cavity through the impeller high speed rotation, the material and the blade, the tooth disc, the material and the material are enrolled under the integrated effect of collision, shear, friction, etc., to achieve a crushing effect. Ultrafine pulverizer is low, and all of the lifescas is used in high quality wear-resistant materials at home and abroad. It has long service life. A small amount of easy wear parts are made of special hard resistance, small size, light weight, easy to replace the accessories. The following is a fluidized bed airflow pulverizer for the injection pulverizer.
Swirl fluidized bed vignette, although its name is long, but look, it is also a fluid bed airflow mill, so it is one of the airflow crushers, which is from traditional fluidized bed. The airflow pulverizer is transformed. Compared with the ordinary fluidized bed vignette, it has two nozzles and mover. Therefore, it is improved the fluidity of the material and the machining capacity of the machine, and the finished product particles produced are thinner. Maybe this kind of gas flow is found, then let us talk about its main performance characteristics. The performance characteristics of the swirl fluidized bed airflow pulverizer are: (1) Take advantage of the jet ability of the machine, using low temperature without medium crushing, ensuring the purity and physical and chemical properties of the product. (2) When the machine runs under negative pressure, it will not produce pollution. (3) The pulverization efficiency can be increased by about 30%, and the grading accuracy can be improved accordingly. (4) Unique design, can extend the use of easy-to-load parts, especially suitable for high hardness, high purity materials. (5) A machine is used or used separately, and the fragmentation is wide. The finished particle size is adjustable. (6) Automatic control, easy to operate, and smooth machine operation. (7) This unit is convenient, no dead angle, can be cleaned in all directions.
Welcome to the above about the fluidized bed airflow pulverizer.