Today I am talking about the safety operation procedure for the air crusher. Ultrafine pulverizer is low, and all of the lifescas is used in high quality wear-resistant materials at home and abroad. It has long service life. A small amount of easy wear parts are made of special hard resistance, small size, light weight, easy to replace the accessories. After the airflow pulverizer is filtered, the pulverizing cavity is sprayed through the Raval nozzle, and the material is repeatedly collided, friction, shear and pulverized, and pulverized material in the intersection of the multi-shaped high-pressure airflow. Next, the rising airflow is moved to the hierarchical region, and the crude material is separated under the powerful centrifugal force generated by the high-speed rotation, the fine particles that meet the particle size requirements are collected by the grading wheel into the cyclone and the dust collector, and the crude particles drops to the pulverization. The district continues to smash. The ultrafine pulverizer is composed of silo, mechanical pulverizer, air blower, cyclone, vibrating screen, liquid nitrogen tank, etc., the deep-cooling pulverizer system is refined by liquid nitrogen as a cold source, and it is crushing at low temperatures by cooling. After the crushing state, enter the mechanical pulverizing cavity through the impeller high speed rotation, the material and the blade, the tooth disc, the material and the material are enrolled under the integrated effect of collision, shear, friction, etc., to achieve a crushing effect. The safety operation procedure for air pulverizer is introduced below.
The operation rules of the airflow pulverizer have been introduced, but its safe operation rules have not been introduced, so for us, learning and understanding is needed, not only because it is very important to the gas flow crusher, but also learning airflow. On the road of the pulverizer, you must also master this, otherwise you can't fully understand the airflow pulverizer. Next, let us start from the specific content. The main contents of the safety operation rules of the airflow pulverizer are as follows: (1) Check all the circuits and electrical components of the airflow grinding machine to determine if it can work properly. (2) The local machine has been grounded to avoid electrification of the shell and the risk of electric shock. (3) Whether the machine spindle is smashed, whether it should be dealt with in time. (4) Whether there is an abnormal situation during the operation, if you should stop checking immediately. (5) Check if the blade is tightened, whether the blade gap meets the specified standards. (6) Before use, it is necessary to check if the duration is filled with debris or miscellaneous materials. If so, it should be removed in time. (7) The pulverizer should work properly before starting the feed. (8) The feeding should be stopped before the pulverizer is parked. Wait until the machine is completely unloaded to stop. (9) The feeding should be uniform, do not excess, so as not to increase the burden of the machine. (10) During operation, the airflow pulverizer cannot be cleaned, overhaul, etc.
Welcome to select the safety operation procedure of the airflow pulverizer.