Xiaobian wrote the content of the airflow pulverizer disassembly technology. Ultrafine pulverizer is low, and all of the lifescas is used in high quality wear-resistant materials at home and abroad. It has long service life. A small amount of easy wear parts are made of special hard resistance, small size, light weight, easy to replace the accessories. After the airflow pulverizer is filtered, the pulverizing cavity is sprayed through the Raval nozzle, and the material is repeatedly collided, friction, shear and pulverized, and pulverized material in the intersection of the multi-shaped high-pressure airflow. Next, the rising airflow is moved to the hierarchical region, and the crude material is separated under the powerful centrifugal force generated by the high-speed rotation, the fine particles that meet the particle size requirements are collected by the grading wheel into the cyclone and the dust collector, and the crude particles drops to the pulverization. The district continues to smash. The ultrafine pulverizer is composed of silo, mechanical pulverizer, air blower, cyclone, vibrating screen, liquid nitrogen tank, etc., the deep-cooling pulverizer system is refined by liquid nitrogen as a cold source, and it is crushing at low temperatures by cooling. After the crushing state, enter the mechanical pulverizing cavity through the impeller high speed rotation, the material and the blade, the tooth disc, the material and the material are enrolled under the integrated effect of collision, shear, friction, etc., to achieve a crushing effect. With the continuous development of airflow pulverizer technology, the airflow pulverizer has gradually penetrated into people's daily lives.
After long-term use, the air pulverizer must be cleaned. After cleaning the air pulverizer, you must remove all the machines. It is also very good to remove skills.
When cleaning, the power can be turned off and the remaining dust is directly removed with the brush. We must remember to clean it by layer. When removing the displace, you can remove the four screws on the base and remove the hopper. When the screen is removed, the airflow mill gate can be opened directly, and finally the screen can be removed.
After the mobile gear is removed, the fastening nut is released first, and then the live teeth are separated from the spindle. Then move the mobile gear and put it safely. Remove the fixed gear, remove the screw and remove the fixed gear. Be careful when disassembling the gas flow crusher. Do not cause any damage to the components of the machine itself.
Committed to airflow pulverizer, has a mature process process, the company has strong technical strength, specializing in the gas flow crusher, quality survival, welcome to consult.