Get a Quote
icon-address anqiu , china

welcome to visit us

In the production process, the airflow pulverizer needs attention.

  The use of ultra-micro gas flow grinding is very broad, such as the ultrafine comminution demand for multi-industry dry materials such as traditional Chinese medicine, western medicine, pesticide, creative, cosmetics, food, feed, chemical industry. Especially for fibrous, high toughness, high hardness, etc., is more perfect.

  Airflow Crusher's entire production line is operated with full enclosed negative pressure, and the production site will never have dust and dust pollution. With PLC programming control, safety measures are multi-visual, parallel work, only one of the measures can effectively function, to eliminate safety hazards. Now the airflow pulverizer is used frequently, and there are many varieties of airflow pulverizer populated on the market, and therefore, the problems they have happen are varied.

  During the production of airflow pulverizer, the temperature rise of the bearing must be often inspected. When the temperature rise exceeds 50 ° C, it should be closed, and the reason is to rule out the fault. New machine operation When the transmission belt is easy to elongate, pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked, replace the production quality and production volume. Blade, the lining should often check the wear situation, if After wear, the productivity decreased (deScend), and the particle size was replaced. The main unit and the grading flow bearing were grease lubrication, using special grease, degree 265-295. Bearing change period of 2000 hours The amount of the grease is filled with 1/2 (epithelial) or 3/4 (lower test) in the bearing cavity, or the 3/4 (lower test) is not too much to fill the grease. Otherwise, the bearing temperature is too high. Spiral feeder change the fat For 4,000 hours, Cape Calcium (CA) base grease.

  The gas flow pulverizer is reasonable, perfect design. The material allowed with stainless steel (stainless steel resistant steel), in line with GMP requirements, the production process is complete, no dust (Morphology: solid particles) overflow, material loss, low, cooling system (COOLING SYSTEM) in continuous operation, the powder temperature produced will never exceed 50 degrees. Pair of special requirements Customers, we can configure a low temperature system, minimum temperature can reach minus 35 degrees. For any fibrous, high toughness, high hardness or a certain water content material. For pollen or other spore plants, it is required to break the material of the cell wall. Break the wall rateIt can reach 95%. Water, alcohol or other liquid can be added, or the gas is protected by gas.

  Shandong El Pie Powder Technology Co., Ltd. is a source of professional production of gas flow crushers. Company Main: Airflow Crusher, Airflow Crusher Series, Laboratory Special Equipment, Mechanical Ultrafine Crusher Series, Improved impact grinding, improved ring mill, improved radone mill, airflow classifier, ultrafine powder Grading machine, inert gas protection ultrafine pulverizer series. The company provides free experiments and testing, welcome new and old users to call to discuss cooperation!

  At the same time, AlPA loves powder technology with its own excessive quality and good market reputation, and has also gained more and more new customers, Hongrun Petrochemical, three trees coatings. , Ningde Times, BYD Automobile and other enterprises have selected AlPA Love Powder Crusher Products under their own demand.