Chinese medicine ultrafine pulverizer machine
Chinese medicine ultrafine pulverizer machine Motional unidirectional high-speed continuous (Continuity) rotation, by motor → belt drive → active disc is high-speed rotary motion, using a single one Turn, there is a smooth rotation when the high speed is rotated. The front cover of the machine must be opened after the shutdown is turned on, and the machine's lumen is cleaned to ensure the cleaning of the machine work surface. The pulverized material can be discharged directly in the machine abdomen.
The thickness of the crushed degree can be achieved by a different aperture screen. The installation and debugging of the ultrafine pulverizer machine of the Chinese medicine, the machine must be stable after seating, and securely securely. The ultrafine pulverizer is an apparatus for ultrafine pulverization of dry materials using air separation, heavy polishing, and shear. It consists of a cylindrical crushed chamber, a polishing wheel, a polishing rail, a fan, a material collection system, and the like. Before the test, the inner cavity of the machine should be cleaned and lock the front cover with a star handle.
After the power is turned on, it should be noted that the phase sequence is to rotate in the direction shown. Pay attention to whether the machine has abnormal noise when testing, in order to pay trucks. Install the storage bag in the discharge. The traditional Chinese medicine ultrafine pulverizer for the user's personal safety, the power supply must be grounded.
Airflow pulverizer and cyclone separator, dust collector, and airplane set into a set of pulverization systems. After the compressed air is dried, it is sprayed into the pulverizing chamber by the Lavar nozzle, and the material is repeatedly collided with the intersection of the multi-high pressure airflow.
The crushing material is pulverized after the fan pulling force Airflow movement to the grading area, under the power of high-speed rotation, the thick centrifugal force generated by the high-speed rotation, the fine particles that meet the particle size requirements are collected by the grading wheel into the cyclone and the dust collector, and the crude particles drops to the pulverizing region to continue pulverization. . The ultrafine pulverizer is an apparatus for ultrafine pulverization of dry materials using air separation, heavy polishing, and shear.
It consists of a cylindrical crushed chamber, a polishing wheel, a polishing rail, a fan, a material collection system, and the like. The crush must be dried, and there is not appropriate for Chinese medicine in moist and grease. Crushing drugs do not exceed half of the pulverized slot. General Chinese medicine is pulverized for half a minute, hard medicine is smashed in a minute. This unit cannot be used for a long time, and the start time must not exceed 5 minutes. If the number of processing is large, it should be used intervals, preventing the bearing overheating, damages the motor.
Do not start the switch when the upper cover is opened. After long-term use, carbon brush and blade are wear (A basic type of component failure) is serious and needs to be replaced. Regular inspection of the screw (Screw) must be tightened. After the job is completed, the machine is turned to 2 minutes, and the remaining materials are clean. After the stop, open the cover to check the parts without damage, turn off the remainder, turn off the cover. Precautions, pay more attention.