Chinese medicine ultrafine pulverizer professional leader
Motion-based leader of the Chinese medicine ultra-microfear machine is continuously rotated, and the motor, belt drive, and active disc are high-speed rotary motion. With a single rotation, there is a smooth rotation when the high speed is rotated. The small Soviet research mill can be used to become an inert gas protection apparatus for an inert gas protection device such as a nitrogen gas such as nitrogen, a carbon dioxide gas. The front cover of the machine must be opened after the stop, in the cleaning of the machine, to ensure the cleaning of the machine work surface.
The pulverized material can be discharged directly in the machine abdomen. The thickness of the pulverity can be achieved by different aperture. Precautions for traditional Chinese medicine, for user personal safety, power supply must be grounded (otherwise: lightning line). The crush must be dry, should not process moisture and grease Chinese medicine. Crushing drugs Do not exceed half of the pulverized slot . Xiao Su Type Grinder is pulverized by the negative pressure air flow caused by the fan, and enter the material collection system.
After filtering, the air is discharged, the material, the dust is collected, and the pulverization is completed. Airflow pulverizer and cyclone separator, dust collector, and airplane set into a set of pulverization systems. After the compressed air is dried, it is sprayed into the pulverizing chamber by the Lavar nozzle, and the material is repeatedly collided with the intersection of the multi-high pressure airflow. The crushing material is pulverized after the fan pulling force Airflow movement to the grading area, under the power of high-speed rotation, the thick centrifugal force generated by the high-speed rotation, the fine particles that meet the particle size requirements are collected by the grading wheel into the cyclone and the dust collector, and the crude particles drops to the pulverizing region to continue pulverization. . General Chinese medicine is pulverized by only half a minute, the hard medicine is pulverized for a minute. This machine cannot be used for a long time, and each start-up time must not exceed 5 minutes.
If the number of processing is large, it should be used intervals, and the bearing is prevented from overheating, damaging the motor. Do not start the switch when the upper cover is opened. After long-term use, the carbon (C) brush and the blade are severely wear, need to be replaced. Always check the screws of the blade, must be fastened. Every day is completed, the machine is turned 2 min and the remaining material is pumped. After the stop, open the cover to check the parts without damage, remove the remainder, turn off the cover. Lubrication finger in the housing of the Chinese medicine ultrafine pulverizer should be regularreplace.
The heating of the bearing must not exceed 35 ° C. Do not remove the electrical and belt protective cover. Application range (fàn wéi), smashing processing of various Chinese herbal medicines, ultrafine pulverized fine zky series ultrafine pulverizer can reach 300 mesh, micrometer or nano-level. Choice The factory is the right direction.