Get a Quote
icon-address anqiu , china

welcome to visit us

How to clean the ultrafine pulverizer?

  How to clean the ultrafine pulverizer?

How to clean the ultrafine pulverizer?

  The ultrafine pulverizer must be maintained and maintained after use, to ensure its service life (Lifetime), work normally, after the processing is completed, for its cleanup work It is also very important, how should it be cleaned for the equipment (shèbèi)? How do you get cleanliness below?

  1. Generally cleaning After production every day, start the air blower, first open the cleaning valve (function: cutout, flow, voltage regulation, shunt, etc.) above the graded machine, flush directly with airflow. Finally, open the airflow pulse valve to rinse the bag. 2. Replacing the variety cleaning requires the removal of the machine-related components for cleaning, and the removal steps are as follows: 1> The cleaning of the crushing chamber

  (1) is removed by the shattered grading chamber with the cyclone collector.

  (2) Connect the hierarchical head and the hierarchy housing or the flange flange or the roller neck screw. Airflow pulverizer and cyclone separator, dust collector, and airplane set into a set of pulverization systems. After the compressed air is dried, it is sprayed into the pulverizing chamber by the Lavar nozzle, and the material is repeatedly collided with the intersection of the multi-high pressure airflow. The crushing material is pulverized after the fan pulling force Airflow movement to the grading area, under the power of high-speed rotation, the thick centrifugal force generated by the high-speed rotation, the fine particles that meet the particle size requirements are collected by the grading wheel into the cyclone and the dust collector, and the crude particles drops to the pulverizing region to continue pulverization. .

  (3) Start on the control (Control) cabinet; the head is open; the grading machine head is slowly opened.

  (4) Open the cover below the pulverizer.

  (5) Rinse the components with a high pressure water gun. (6) After the cleaning is completed, start on the control (CONTROL) cabinet; the headrest; make the changing machine head, slowly dropped.

  2. Cleaning of the cyclone

  (1) Remove the cyclone collector and the connection pipe of the isolated collector

  (2) Remove the inner pipeline in the cyclone collector

  (3) Open the butterfly valve below the cyclone collector

  (4) flush with high pressure water gun Parts.

  3. Washing

  (1) of the Isolated Collector

  (2) Remove the Isolation Collector and the Isolation Collector Remove the Isolation Collector Bag.

  (3) Open the butterfly valve below the cyclone collector.

  (4) Rinse the components with a high pressure water gun.

  Parts When confirming that has been cleaned, use disinfection alcohol and then clean it twice.. Xiao Su Type Grinder is pulverized by the negative pressure air flow caused by the fan, and enter the material collection system. After filtering, the air is discharged, the material, the dust is collected, and the pulverization is completed.

  The small Soviet research mill can be used to become an inert gas protection apparatus for an inert gas protection device such as a nitrogen gas such as nitrogen, a carbon dioxide gas. After cleaning the installation of the device, see the installer of the TC series device. When the ultrafine pulverizer is cleaned, it is necessary to clean up, so that it can improve work efficiency, increase production, but how to clean it, I hope to give you a microblue. Come to help!