Toner special airflow pulverization grading machine has: high precision control, concentrated in particle size distribution, and high yield rate. Process maturity can be widely used in printers, copier toner production. Customized manufacturing according to different applications and requirements, flexible operation, stable operation.
The airflow pulverizer is suitable for raw materials, which has been recognized by the majority of users, which in turn has been widely popular and used. To select a gas flow pulverizer, it is mainly to see if it is suitable for use in the material that needs to be machined. If it is not based on this, then it is likely that the equipment required to produce it is inferior or the equipment you need to produce it will give future production. Bring huge losses.
So, it is best to do the following steps when choosing the airflow pulverizer:1. To perform material test, the purpose of test is to see the distribution of particle size;
2. To see the operability of the device, try to make a simple and clear;
3. Look at the difficulty of cleaning of the equipment, there is no dead angle;
4. Look at the collection rate of materials;
5. Look What problems will occur during the pulverization process, when experimenting, the better the problem, the better, so that the equipment is purchased will be more necessary to meet the needs;
6. Take a look at the feed pressure and pulverization of the pulverization plate In contrast, most manufacturers' feed pressure is greater than the crushing pressure, the main reason is afraid of the anti-blow, but the crushing pressure is very crushed, so try to choose the smash pressure, small feeding pressure, large particles The radius distribution is more concentrated;
7. Select the device with only one collecting mouth, there is currently a number of devices due to technical capabilities, the material needs two positions to collect materials, which will cause the homogeneity of the material. Question, after the pulverization is completed, the two materials will be mixed and increase the link, so choose only one device for collecting the mouth;
8. The feed should not use pulse to blow dust, which will affect the particle size. Distribution;
9. Consider the feed mode of the material, some feeding mode is one of the nozzles of the pulverizing disk nozzle, the diameter of this nozzle is more than other nozzles, so the ability is greater than other nozzles to cause materials. After entering the pulverization plate and the position of the exit is closer to the export, the appearance of large particles and the poor particle size distribution.
The above is the matter that the airflow crusher needs to be done. What harvest after everyone saw it? As a domestic airflow pulverizer source manufacturer reminded the majority of users, when choosing the airflow crusher, do not determine the application of the equipment with its prices, China has passed the small and cheap habits in China, Because so many people are thus being deceived, so I hope to make careful consideration when purchasing a gas flow crushing machine, truly from the performance and quality of the equipment.
The powder equipment industry is an eternal industry coexisting with humans. Science and technology is an important factor in promoting the development of the powder equipment industry and important forces. ALPA powder technology gives full play to the company's research and development strength, relying on science and technology. Force, innovative design high-efficiency airflow crusher powder equipment breaks through technical barriers, successfully obtained national utility model patents. In the future, AlPA Powder Technology will produce more cleaner and discharged airflow powder powder equipment, further promotion to advocate energy-saving and emission reduction, improve the ecological environment.