Examples of some common problems on the airflow milling machine

　　Airflow pulverizer in the pulverizer, for this important website product, the previous website has begun, so that everyone can constantly learn and understand, thus increase Your own knowledge, and as soon as possible to achieve the expected goal (Cause) and requirements. Therefore, in order to accelerate the speed of learning, the following will continue this work, and the specific explanation is as follows.

　　1. Airflow pulverizer and screen crusher, if it is compared from the application range, then which one is to be broad? Airflow fan machine and screen pulverizer, these two are in the field of crusher. Category. The airflow pulverizer changes the normal air of the gas source to nitrogen, carbon dioxide gas, which can make the unit become an inert gas protection device, which is suitable for pulverizing grade processing of materials such as flammable and explosive, easy oxidation. However, if you look at the application range, then the latter, that is, the screen crusher, its application is wide. Because of the airflow pulverizer, it is crushed with materials within 5 mm, and there is a certain limitation.

　　2. The amount of pulverization and treatment of the airflow pulverizer is mainly related to what? The amount of pulverization and treatment of the airflow pulverizer, in these two, its associated influencing factors (Factor), mainly the specific use of the pulverizer, and the Specifications models. Also, by these, the value of the value of the gas flow pulverizer is pulverized and the amount of treatment amount is appropriate.

　　3. If the feed is too small in the airflow mill, then what effect? And, what is the collection of finished products in a crusher? If the feed is too small in the airflow mill, there will be adverse effects on the pulverizer itself. At least, it will reduce the crush quality and effect. Because, in the airflow pulverizer, it is high-speed airflow to cause a strong collision, thereby achieving the crushing effect, too small, and it is not possible to achieve it. As for the collection of finished products in the pulverizer, it is achieved by collectors.

　　4. Airflow pulverizer particle size is unstable (explained: stable stability; no change), what specific reasons? If the airflow pulverizer is unstable (explained: stable stability; no change), then there are two, one is the system configuration (deploy) unreasonable, or the loss in the system (LOSS) Excessively, fromThe finished particle size is unstable (explained: stable stability; no change). Second, it is a change in operation, but the change is unreasonable or inappropriate, it will result in the above problems.