How to solve the problem that the gas flow crusher may appear in use?

　　Chemical, papermaking field gas flow application (1) ultrafine catalyst, can increase the petroleum decay speed by 1 to 5 times; (2) chemical fiber, textile, improve the smoothness (titanium oxide, silica); (3) ) Rubber, enhanced, highlighting, anti-aging (calcium carbonate, titanium oxide); (4) paint, coating, dye, high adhesion, high performance; (5) daily chemical, cosmetics, toothpaste, etc .;

　　The airflow pulverizer is a commonly used mechanical equipment in the industry. During operation, sometimes internal equipment is unstable, and vibration occurs in actual operation, the internal noise is large, the material export particles do not meet the standard, this is what is going on ? Let's take a look at the problem that the airflow crusher may appear in use.

　　The airflow pulverizer is that the compressed air is accelerated by the Lavar nozzle to accelerate the ultrasonic speed airflow, and the material is fluidized (the airflow expansion is suspended by a fluidized bed. Mutual collision), so each particle has the same motion state. These are problems. The airflow pulverizer tends to think that the equipment is broken, but the fact is not the case. In most cases, it is caused by some of the error operations during a particular operation, or when the device is not installed in place. It is possible to leave a big gap in the middle, or don't fix it, so we need to check it carefully.

　　Don't panic when the airflow pulverizer has internal problems. First, check if our materials have any problems. If there is no problem, please remove the device carefully to check if there is a installation problem inside, or if the chassis is in an unstable state, all of which should be carefully checked. The cause of the airflow pulverizer has failed because the chassis is often unstable, causing a large amount of vibration and internal work. Therefore, we must pay attention to this problem. If there is a problem, the power and device switches will be closed first. Then check the key slowly. In recent years, the attention of green environmental protection and sustainable development has been mentioned, whether it is Ningde era, or AlPa powder technology is constantly practicing sustainable development. . In the future, there is still an infinite challenge, but as a large-scale enterprise with social responsibility, ALPA powder technology will continue to adhere to technological innovation, and join hands with partners to achieve economic benefits, environmental benefits and social benefits.