If the medical ultrafine pulverizer is too high, the traffic will be faster.

　　The medical ultrafine pulverizer as the name is a mechanical equipment in the medical production area, the medical ultrafine pulverizer is mainly used to smash the Chinese and Western medicine particles, the broken speed is fast, the accuracy is good, the following everyone will learn together to understand the next generation of medical ultrafine pulverizer Working principle!

　　The price of the drug ultrafine pulverizer is also relatively reasonable, and the ultrafine pulverizer produced by the company has been recognized by many customers in the market. In addition to the particle size, the airflow crushing product also has the characteristics of narrow particle size distribution, smooth particle surface, high purity, high activity, good dispersibility. The Joule Tomson cooling effect due to the adiabatic expansion of the compressed gas during the grinding process is also suitable for ultrafine grinding of low melting points and thermal materials. The gas-up ratio in the medical ultrafine pulverizer is an important technical parameter and important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which affects the fineness of the product. However, if the gas ratio is too high, it will not only cause waste of energy, but also make some dispersion properties of some particulate materials. When the feed is sized, when the hard material is pulverized, the particle size of the feed is more stringent. For titanium powder, when pulverizing the calcined material, control 100 to 200 mesh, the material after the grinding surface is generally 40 to 70, and cannot exceed 2 to 5 mesh. The working temperature of the medical ultrafine pulverizer is also a factor affecting work efficiency. When the temperature is too high, the gas flow increases. Taking air as an example, the critical speed at room temperature is 320 m / s. When the temperature is raised to 480 m / s, the critical speed can be increased to 500 m / s, that is, the kinetic energy is increased by 150%. Therefore, increasing the temperature of the working fluid is advantageous to increase the quality of grinding. Working pressure is the main parameters of generating jet velocity, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the superheated steam is pulverized, the steam pressure is typically between 0.8 and 1.7 mPa, and the calcined material after crushing is generally higher, and the titanium powder after surface treatment can be lowered. The above is a possible factor that the medical gas flow grinder manufacturer is introduced to the work efficiency of medical gas flow grinding machines. We can make a brief understanding, you need to purchase a vortex grinder, a disc grinder grinder, a super-crusher product, please call us consult. Ultra-small pulverizer is an ultra-small grinding ultra-small pulverizer, suitable for university laboratories, factory laboratories, pharmacies, Chinese hospitals, and families.Do fine grinding, carry it with you. Hongxu series models can be widely used in the ultrafine pulverization needs of Chinese medicine, western medicine, pesticide, biological, cosmetics, food, feed, chemical, ceramics, metallurgical minerals. Especially for fiber (such as Chinese herbal medicine, ganoderma lucidum, etc.), high hardness (such as diamond, ceramics, etc.), is more perfect.