What are the main factors affecting the crushing of Dendrobium ultra-microfear machine?

　　1. The impact of crushing time to Hoshan Dendrobium ultrafine pulverization passed the analysis (Analyze), and the ultra-fine pulverizer is at 20 ° C at the Temperature 20 ° C, and the powder is fixed. The body particle size is 220 mesh, the number of grinding blankets is 60%, and the observation has changed the amount of powder in the amount of the grinding time from 1 min to 9 min, and there is a maximum fine powder in 5 min. Rate value. According to the analysis (Analyze), the cause of the coarse powder is completely opened as the grinding time is long, and the water-soluble macromolecules are increased, the more the hydrophilic groups between each other are exposed, the more easily stick, formed. The agglomerate makes the quantity of the powder. Therefore, single factor (Factor) experiment (Experiment) is initially determined that 5 min is the best pulverization time. 2. Feed particle size to the influence of Hoshan Dendrobium ultrafine pulverization By analysis, the ultra-microfiner is at the starting temperature (Temperature) 20 ° C, set the pulverization time 5 mi n, and the amount of grinding the contact 60%, observing the powder of different particle sizes charged, the powder yield is constantly changing, the smaller the particle size, the amount of fine powder gradually increases, when the particle size is less than 20 μm, the fine powder rate tends to be smooth The analysis (analyse) is the gradual decrease in the particle size of the powder, the less disadvantaged the shear and grinding of steel beads in the 1.5 ml abrasive tube, resulting in no increase in powder or increasing. Ultrafine pulverizer is a fine powder and ultrafine powder pulverization equipment, which is mainly suitable for medium, low hardness, humidity of less than 6%, and a non-flammable and explosive non-metallic material of the Moh's hardness is below

　　9. For any fibrous, high toughness, high hardness, or materials having a certain water rate can be adapted. The material of the cell wall and other spore plants, which are higher than 95%. At the same time, it is suitable for dry and wet crushing. Wet, water, alcohol or other liquid can be added thereto. When the ultrafine pulverizer works, the material that needs to be pulverized from the feed homper side of the side of the machine cover, relying on the grinding roller apparatus suspended on the main chamber frame, rotating around the vertical axis, while itself rotates, due to rotation The effect of centrifugation, the grinding roller is swinging, tightly pressing the mill, and the shovel shovel is sent between the mill and the mill, and the crushing material is achieved due to rolling rolling of the grinding roller.the goal of. Therefore, a single factor (Factor) experiment (Experiment) preliminary identification 220 is an optimal number of feeders.

　　3. The amount of grinding media to the hypermatographic ultra-fine pulverization of Hoshan Dendrobium is known (the Dendrobium ultrasound is at 20 ° C at the time of the Temperature 20 ° C, set the pulverization time 5 mi n, powder particle size 220 Objective, observations As the number of abrasive tubes is different, the powder yield is constantly changing, first increasing, and then stabilizing and finally reducing the reduction, when the number of grinding is 60%, the fine powder rate The trend (TREND) is reduced after a stable and increased to 80%. Ultrafine pulverizer is a fine powder and ultrafine powder pulverization equipment, which is mainly suitable for medium, low hardness, humidity of less than 6%, and a non-flammable and explosive non-metallic material of the Moh's hardness is below 9. For any fibrous, high toughness, high hardness, or materials having a certain water rate can be adapted. The material of the cell wall and other spore plants, which are higher than 95%. At the same time, it is suitable for dry and wet crushing. Wet, water, alcohol or other liquid can be added thereto. Analysis (Analyze) The grinding tube gradually reached saturation with the grinding of the grinding medium, tends to stabilize (explained: stable stability; no change) does not grow, increase the amount, in dramatic grinding, powder The amount of overflows, the loss (LOSS) is made, so that the powder yield is reduced. Therefore, a single factor (Factor) experiment (Experiment) initially determined 60% of the best grinding medium.