Safety of airflow pulverizer

　　Today, I will talk about the use of gas flow crushers. The company is introduced by the company to introduce the safety of the airflow crusher

　　Welcome to the company, the above information on the use of gas current crushers is the company's finishing. Safety of airflow crushers, through the introduction of the previous article, we have had a preliminary concept of the use of air current crushers, and some of its basic knowledge, but there are more, need us to discover and Master, thereby correct use of airflow classifiers, and also to classify, or other types, such as BF series mechanical grade machine, hoping to learn more updated knowledge. Using the operation safety rules are: (1) Before starting the grading machine, you should check all the connectivity portions, whether it is loose, and whether the seal is good. The ultrafine pulverizer Zky series can be widely used in the ultrafine comminution demand for traditional Chinese medicine, western medicine, pesticide, biological, cosmetics, food, feed, chemical, chemical, ceramics. Especially for fibrotic, high toughness, such as Cordyceps, tea, Ganoderma lucidum, etc. is more perfect. There is also a rotating part, but also check whether it is flexible and reliable. Once an abnormality is found, REMOVE should be excluded, otherwise the machine cannot be started. (2) The direction of rotation of the motor shall be rotated in accordance with the prescribed direction. (3) Lubrication should be strictly in accordance with the requirements of the regulations, and different lubricants are used to use appropriate lubricants. (4) The water content of the material should be strictly controlled, otherwise it will affect the amount of product quality (CHARACTER). (5) The grading machine belt drive shroud is to be inspected, and it cannot be dismantled freely. The ultrafine pulverizer Zky series can be widely used in the ultrafine comminution demand for traditional Chinese medicine, western medicine, pesticide, biological, cosmetics, food, feed, chemical, chemical, ceramics. Especially for fibrotic, high toughness, such as Cordyceps, tea, Ganoderma lucidum, etc. is more perfect. (6) Removing equipment should be carried out in the case of power failure, cut off (cut; cut off) the total power supply. When the ultrafine pulverizer works, the material that needs to be pulverized from the feed homper side of the side of the machine cover, relying on the grinding roller apparatus suspended on the main chamber frame, rotating around the vertical axis, while itself rotates, due to rotation The effect of centrifugation, the grinding roller is swing outward, pressing the mill, so that the shovel is shoved between the mill and the mill, which is reached due to rolling rolling of the grinding roller.The purpose of crushing materials. (7) The electric control cabinet cannot be opened freely, and the non-professional person cannot operate to avoid danger. During the running process, some of the inspections of some parts are: bearing: Temperature cannot exceed 70 ° C, whether it is lubricated in place, and has no lubrication. Body: Bolts (composition: head and screw composition) are fastened, whether there is abnormal vibration or sound during operation. Motor: The temperature can not exceed 60 ° C, whether there is abnormal vibration, odor or sound. In general, the order of parking is: blocking the grading machine back sink - stopping water - waiting until all of the grooves in the groove is finished, press the stop button parking - put the spiral portion to the mine surface. In this process, it is necessary to pay attention to the failure, immediately cut off (cut; truncated) power supply, and notify the professionals to overhaul, do not handle it, so as not to damage the equipment, hazard.