Airflow milling equipment raw materials

Today, we will discuss the original material input of the airflow grinding machine, which introduces the raw material input of the gas flow grinder equipment. Ultrafine pulverizer is low, and all of the lifescas is used in high quality wear-resistant materials at home and abroad. It has long service life. A small amount of easy wear parts are made of special hard resistance, small size, light weight, easy to replace the accessories. After the airflow pulverizer is filtered, the pulverizing cavity is sprayed through the Raval nozzle, and the material is repeatedly collided, friction, shear and pulverized, and pulverized material in the intersection of the multi-shaped high-pressure airflow. Next, the rising airflow is moved to the hierarchical region, and the crude material is separated under the powerful centrifugal force generated by the high-speed rotation, the fine particles that meet the particle size requirements are collected by the grading wheel into the cyclone and the dust collector, and the crude particles drops to the pulverization. The district continues to smash. The ultrafine pulverizer is composed of silo, mechanical pulverizer, air blower, cyclone, vibrating screen, liquid nitrogen tank, etc., the deep-cooling pulverizer system is refined by liquid nitrogen as a cold source, and it is crushing at low temperatures by cooling. After the crushing state, enter the mechanical pulverizing cavity through the impeller high speed rotation, the material and the blade, the tooth disc, the material and the material are enrolled under the integrated effect of collision, shear, friction, etc., to achieve a crushing effect.

When the crusher is working, first enter the feedstock, then pulverize the raw material and then output tailings. How is this process completed? Let's take a look at Tsinghua Powder and tell you this process.

The material enters the fluidized bed pulverizer from the feed port. Under the driving of the airflow, the material collides and rubbed in the middle of the crushing chamber. The qualified fine powder enters the turbine classifier of the upper portion of the fluidized bed through the rising airflow. The classifier is classified for qualified materials and then enter the cyclone dust collector. The finer tailings enter the bag filter through the airflow. After the bag dust collector, the tailings enters the lower exit of the dust collector and discharge pure air.

The tail discharge prevents the end of the machine from accumulating in the machine to prevent the machine from blocking. The editor also reminds everyone that when the machine does not work, it must be cleaned to prevent damage to the machine.

Welcome to select the above, the feedstock input of the jet crusher equipment.