Several questions that should be paid attention to in the use of gas flow crushers

Xiaobian wrote the contents of the use of gas current crusher use. After the airflow pulverizer is filtered, the pulverizing cavity is sprayed through the Raval nozzle, and the material is repeatedly collided, friction, shear and pulverized, and pulverized material in the intersection of the multi-shaped high-pressure airflow. Next, the rising airflow is moved to the hierarchical region, and the crude material is separated under the powerful centrifugal force generated by the high-speed rotation, the fine particles that meet the particle size requirements are collected by the grading wheel into the cyclone and the dust collector, and the crude particles drops to the pulverization. The district continues to smash. Ultrafine pulverizer is low, and all of the lifescas is used in high quality wear-resistant materials at home and abroad. It has long service life. A small amount of easy wear parts are made of special hard resistance, small size, light weight, easy to replace the accessories. The ultrafine pulverizer is composed of silo, mechanical pulverizer, air blower, cyclone, vibrating screen, liquid nitrogen tank, etc., the deep-cooling pulverizer system is refined by liquid nitrogen as a cold source, and it is crushing at low temperatures by cooling. After the crushing state, enter the mechanical pulverizing cavity through the impeller high speed rotation, the material and the blade, the tooth disc, the material and the material are enrolled under the integrated effect of collision, shear, friction, etc., to achieve a crushing effect. With the continuous development of airflow pulverizer technology, the airflow pulverizer has gradually penetrated into people's daily lives.

Small airflow pulverizer has improved on design and component combination, which has great help to us. Its quality is very good, but if there is no long-term maintenance and maintenance, it is also declining. Check the operating components, electrical components, and transmission. Please repair it in time if you have an abnormality. Don't bring trouble to the small air pulverizer to prevent accidents. The small air pulverizer is a pulverizer, any mechanical equipment, has certain precautions before use, we must check the precautions to operate, the damage rate is the lowest, then before using a small jet crushing machine What preventive measures should you take?

1. Check whether the firmware is tight, use the front spindle in the correct direction to avoid damage to the machine.

2. Lubrication should be performed as required to make the machine run normally.

Three. Before the material is added to the mill, it is not mixed to avoid damage to the mill.

4, do not process foreign matter in time to avoid damage to the cutter.

5. When using a pulverizer, if there is abnormal, it should be treated immediately to avoid a lot of loss.

6. If damage is damaged, you should be replaced immediately and check certain parts regularly.

Committed to airflow pulverizer, has a mature process process, the company has strong technical strength, specializing in the gas flow crusher, quality survival, welcome to consult.