Crushing speed of ultrafine pulverizer

　　Train speed of traditional Chinese medicine ultra-fine crusher General Chinese medicine ultrafine pulverizer General Chinese medicine crush only half a minute, hard medicine is smashed in a minute. This machine can not be used for a long time, each boot time must not exceed 5 minutes. If the number of processing More, interval, to prevent overheating of bearings, damage the motor. Do not start the switch when the upper cover is opened. After long-term use, the carbon brush and the blade are wear (a basic type of components failure), need Replacement. Chang inspected the screws must be tightened. After the job is completed, the machine is turned 2 min, and the remaining material is clean. After stopping the machine, open the cover and check the parts after removal.

　　Chinese medicine ultrafine crusher machines must be stable, and secure it with ground screws. Before the test, the inner cavity of the machine should be cleaned and the front cover is used as a star handle. Tighten. After the power is turned on, pay attention to the predefinition of it, so that the spindle is rotated in the direction shown. When testing, you should pay attention to whether the machine has abnormal noise, in order to truck inspection. In the displacement, install the storage bag. Chinese medicine The movement of the ultra-fine pulverizer machine is continuously rotated, and the motor, belt drive, and movable disc are high-speed rotational motion, and the transmission is smooth when the high speed rotation is rotated. The gas generating pulverizer material enters the cylindrical pulverizing chamber through the feed opening, and is crushed along the grinding rail, and the pulverization is achieved.

　　The main applied mechanism of ultrafine pulverizer determines its application range, high finished product, typical materials are: super hard diamond, silicon carbide, metal powder, etc., high purity requirements: ceramic color, medicine , Biochemical, low temperature requirements: medicine, PVC.

　　Xiao Su Type Grinder is pulverized by the negative pressure air flow caused by the fan, and enter the material collection system. After filtering, the air is discharged, the material, the dust is collected, and the pulverization is completed. The front cover of the machine must be opened after the shutdown is turned on, and the machine is cleaned to ensure the cleaning of the machine.

　　The pulverized material can be discharged directly in the machine abdomen. The thickness of the crushing can be achieved by different aperture sieves. More Related (Related) products, you can contact our company.