Table size range of types of small airflow classifiers

　　Fluidized bed gas flow is widely used in various industries, continuously pulverized, can keep the purity of the pulverized product, short smashing time, simple structure, the fluidized bed of the after-sales, easy to operate, small area, low area Noise! ​​

　　With the development of the powder industry, the requirements for powder are getting higher and higher, many industries demand ultrafine powder, then the airflow classifier has played a lot. effect. By controlling the demand granular segment, the airflow granulation can obtain a powder in the relatively concentrated particle size, which provides a convenience of subsequent processes.

　　Airflow classifier With the dust collector, the introducer is set into a set of hierarchical systems. The material is moved from the lower air flow at the lower air flow at the lower airflow at the bottom of the flexible airflow to the hierarchy, and the thick fine product is separated, and the fine particles required for the particle diameter according to the fine particles required by the particle diameter according to the strong centrifugal force generated by the high-speed rotation. The wheel blade gap is collected into the cyclone separator or the dust collector. The thickness of the crude particles is partially disappeared. The roughness of the secondary wind is removed, and the thickness of the thickness is separated, fine The particles rise to the secondary grade of the graded area, and the crude particles are dropped to the unloading port.

　　Small airflow classifier The particle size can be controlled between 3-74 microns, for the feed particle size, as long as it is not too thick, in reasonable In the range, the effect will not be too bad. Because the materials using the airflow classifier are ultrafine powder, only the powder particle size range is wide, and the use of airflow classifier is to obtain precise particle size products.

　　This small airflow classifier Generally, many university laboratories, research institutes will demand such small production equipment, because their grading is accurate, the performance is stable, easy to operate, easy to clean, affirmed. For more information on airflow classifiers, please continue to pay attention to Shandong El Pie!

　　The generation of processing equipment requires different lining materials according to the material, from the feed end to the discharge end, metal isolation, metal The increase in foreign matter is controlled at the PPM level, and the standards of zero contamination of the material can be achieved on the material and internal protective means. For those with toughness, viscosity, thermal or other materials, AlPA can provide a variety of machining environments and processing methods to meet customer needs.